Related Manuals for Hunter Terrace Cove
Summary of Contents for Hunter Terrace Cove
- Page 1 Terrace Cove Installation Manual Model: 51581 Flat Matte Black 51582 Matte Silver Fan weight ±2 lbs: 15.7 lbs (7.1 kg) ©2021 Hunter Fan Co. PG4021 r092021...
- Page 2 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those Hunter Pro Tip: parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
-
Page 4: Choosing The Right Installation Location
Installing the Ceiling Bracket You have two options for installation. Pick which one works best for your location. Remove any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box. Hunter Pro Tip:... - Page 5 If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a quali ed electrician. You are going to need these: Hunter Pro Tip: Here is how to connect the wires: 4 Wire Nuts (these are in the...
-
Page 6: Installing The Canopy
1886 Installing the Canopy 2 of 3 1 of 3 Canopy Canopy Screws Screws Hold the canopy up with the screw holes Swing the fan up to align the canopy screw aligned. Partially install two canopy screws, Partially install a canopy screw, found in the holes with the mounting holes on the ceiling hardware bag, between the ceiling plate hooks. - Page 7 1886 Assembling the Switch Housing 2 of 6 1 of 6 Light Kit Screw Light Kit Screw Insert a third screw, found in the Feed the wire plug through the center hardware bag, into place and hole of the upper switch housing, then tighten all three screws.
- Page 8 1886 Installing the Pull Chains Fan Pull Chain Remove and discard the plastic connectors from the ends of the pull The fan pull chain controls chains (if necessary), then connect the the speed: from high to off. appropriate pull chain pendant to each of the short chains coming from the switch housing.
-
Page 9: Troubleshooting
Hunter instructions, accidental damage caused by the fan owner or related parties, Please do not ship your fan or any fan parts to Hunter. Delivery will be refused. modifications to the fan, improper or incorrectly performed maintenance or repair,...
Need help?
Do you have a question about the Terrace Cove and is the answer not in the manual?
Questions and answers