Grounding Instructions - Hunter 90400 Owner's Manual

This appliance is for household
use only and may be plugged into
any 120-volt AC electrical outlet
(ordinary household current). DO
NOT use any other type of outlet.
WARNING
This unit is suitable for grounded
receptacle use only.
The cord has a grounded plug as
shown in Figure 1. An adapter, as
shown in Figure 2, is available for
connecting three-blade grounding-
type plugs to two-slot receptacles.
The green grounding lug extending
from the adapter must be
connected to a permanent ground
such as a property grounded
outlet box. The adapter should not
be used if a three-slot grounded
receptacle is available.
Grounded
Plug
Grounding
Pin
©2011 Hunter Fan Co.

GROUNDING INSTRUCTIONS

Grounded Outlet
Box Cover
FIGURE 1
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the
cord or the appliance.
2. To insert plug, grasp it firmly
and guide it into the outlet.
3. To disconnect the appliance,
grasp the plug and remove it
from the outlet.
4. Before each use, inspect
the line cord for cuts and/or
abrasion marks. If any are
found, the appliance should
be serviced and the line cord
replaced. Please return it
to our Service Department
or to an authorized service
representative.
5. NEVER wrap the cord tightly
around the appliance, as this
could place undue stress on
the cord where it enters the
appliance and could cause it
to fray and break.
6. DO NOT operate appliance
if the line cord shows any
damage, if the appliance
works intermittently or stops
working entirely.
Adapter
Grounding
Means
FIGURE 2
4
Metal
Screw
Grounded Outlet
Box Cover
44826-01 20111014