Cleaning; Maintenance - Hunter TABLE FAN Owner's Manual

maINtENaNCE

this fan is permanently lubricated
and will not require additional lubrica-
tion (oil) for the life of the fan.
this fan requires little maintenance
and contains no user serviceable
parts. DO NOT try to fix it yourself.
Contact qualified service personnel
if servicing is needed.
to CLEaN:
1. Before cleaning, turn fan off and
unplug from electrical outlet.
Wipe off excess dust with a lint-
free cloth.
2. to ensure adequate air circulation
to the motor, keep vents located
at the rear of the motor hous-
ing free from dust accumulation.
a vacuum cleaner hose can be
used to clean these vents.
3. Do Not immerse the fan in wa-
ter or any other liquid.
CLEaNING GrILLE aND BLaDE:
1. turn the fan off and unplug from
the electrical outlet.
6
2. Disassemble Grilles by carefully
removing the Grille ring Screw
on the bottom of the grille and
removing the Grille ring. See
figure 4.
Grille
Ring
Grille Ring
Screw
fIGUrE 4
3. Grilles and blades may be
cleaned with soft cloth dampened
with mild soap and water.
4. Use a soft, slightly damp cloth to
wipe the remaining fan parts.
5. Do Not allow water or any other
liquid to get into the motor hous-
ing or base.
6. after the Blades and Grilles have
dried completely, reassemble the
fan. reposition the Grille ring so
that the Grille ring Screw is at
the bottom of the Grilles. Careful-
ly align the Grille ring Screw into
its holes and tighten it so that the
Grille ring is securely in place.
Do Not oVErLy tIGHtEN.
7. Do Not plug fan into an electri-
cal outlet until it has been fully
reassembled.
44800-01 11/29/2007