Event Setup - D-Link mydlink DNR-202L User Manual

Section 5: Configuration
This page is where you specify how you would like to receive event notifications from your DNR-202L. An event can be triggered by various
sources, such as motion detection or digital input. When an event is triggered, a specified action will be performed.
Enable Email Account: Check this box if you would like to receive event notifications via e-mail.
Email addresses: Enter the configuration for the email server account. These settings are specific
to your e-mail provider. *
Motion: This option allows you to receive notifications when motion is detected during
camera live video monitoring.
DI Trigger: This option will allow you to receive notifications when there is an external
trigger input to the camera.
Loss: This option will allow you to receive notifications when a camera loses network
connection.
Alert Mail: Check the Alert Mail box to have e-mail sent to a specified SMTP account after
a camera event is triggered.
Interval: This setting allows you to specify how long, in seconds, you would like to
receive e-mail notifications from your NVR.
Event Record: Check the Event Record box to have specified events recorded.
pre-event: Specify the period to save recorded data before the camera event takes place.
post-event: Specify the period to save recorded data after a camera event takes place.
Enable Recording Check to Enable Recording Sechedule, and choose the days of the week and
schedule: the start/end time for scheduled recording.
*Note: If you don't know the configuration of your e-mail account, do a web
search for your SMTP (Simple Mail Transfer Protocol) settings with the name of your
e-mail provider.
D-Link DNR-202L User Manual

Event Setup

52