Event Setup (Dns-726-4 Only); D-LNk Dns-722-4/Dns-726-4 User Manual - D-Link DNS-726-4 - Network Video Recorder Standalone DVR Product Manual

Secton  - Configuraton
This option may be configured and applied using DNS-726-4.
Step.1: Choose the camera, and then select one of the three events.
Connection lost:
Action is triggered if the connection between the
camera and NVR is lost.
Motion Detected:
All motions from camera will trigger the action.
Input:
External input will trigger the action.
Note
Before setting the event Motion from Camera, you must first configure
the motion detection function on your camera
Step.2: Click the Add button to setup the actions of the
event.
Output:
If the event occurs, the system will send a signal to
other connected devices.
E-mail:
If the event occurs, the system will send an E-mail
to the pre-set contacts.
Step.3: Click the action, and then click the Configure button to modify the details of that action if necessary.
Step.4: Repeat step 2 through 3 to add more actions.
Step.5: Repeat step 1 through 3 to set more cameras.
Note:
• In addition, you can also set the event notification for when the hard disk is full.
• The screen will display the event information after you have configured the settings.

D-Lnk DNS-722-4/DNS-726-4 User Manual

Event Setup (DNS-726-4 Only)

7