D-Link mydlink DNR-202L User Manual page 34

Section 4: mydlink View - NVR
1. Recording Enable/Disable
In single-channel mode, tap on the video stream once and tap the recording
button to manually enable/disable recording.
2. Pan Tilt Zoom (PTZ)
To access the PTZ controls, tap on the video stream once while streaming
single-channel video, and tap on the PTZ button (
panel will appear. Tap on the PTZ button again when you want to to disable
the Pan Tilt Control panel.
1 Pan Tilt Control
2 Zoom
Note: The PTZ control function must be enabled on the camera connected to the
DNR-202L in order for mydlink View - NVR to control the PTZ function. See
Video" on page 38 for more information.
3. Video Stretch
In Live View or Playback mode, tap on the video Stretch button (
expand the video to full-screen. Tap the button again to disable Stretch.
Note: This function may alter the aspect ratio of the video.
4. Snapshot
While streaming in single-channel mode, tap the Snapshot button (
capture an image. The image will be saved to the device's picture storage
area. When viewing video in four-grid view, tap the Snapshot button (
take snapshots of all the channels. These images will be saved to the device's
camera roll.
Note: The saved snapshot(s) will be at the original resolution of the IP camera video.
D-Link DNR-202L User Manual
Tap on the directional arrows to pan and tilt the camera
Pinch zoom by moving finger and thumb together or apart
). The Pan Tilt Control
"Live
)to
)to
) to
2
4
5
3
1
2
34