Assembly And Installation; Attaching External Drives - D-Link mydlink DNR-202L User Manual

Mydlink camera video recorder

Hide thumbs Also See for mydlink DNR-202L:

Table of Contents

Section 2: Assembly and Installation

Step 1

Connect the provided power adapter to the DNR-202L. Plug the power adapter into a wall

outlet or power strip.

Step 2

Attach one end of the provided Ethernet cable to the Ethernet port on the NVR. Attach the

other end to the router or switch in your network.

Note: If you do not connect an Ethernet cable, the DNR-202L will beep.

Step 3

Attach an external USB HDD to the USB HDD1 port.

The NVR will mount the HDD and beep once.

Note: When you want to remove an HDD, press and hold the HDD release button for at least three

seconds. The NVR will release the HDD and emit a long beep. You can now unplug the USB cable.

D-Link DNR-202L User Manual

Assembly and Installation

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the mydlink DNR-202L and is the answer not in the manual?