Configuration; Using The Configuration Interface - D-Link mydlink DNR-202L User Manual

Section 5: Configuration
After completing the Setup Wizard, you are ready to use your NVR. The NVR's built-in web configuration utility is designed to
allow you to easily access and configure your DNR-202L.
Step 1
After initial setup, when the Setup is Complete, you have the option to Go to
NVR to adjust additional NVR settings. Click on Go to NVR, or write down the
IP Address of the NVR so you can later enter it into a web browser to open the
configuration interface.
Step 2
Log in to access the configuration interface. User name is Admin. If you did not
create a password in the Setup Wizard, the password is blank by default. Click OK.
D-Link DNR-202L User Manual

Configuration

Using the Configuration Interface

37