Pin Tuck - Husqvarna Viking Huskylock 905 User Manual

3-7. Pin tuck

Pin tucks are stitched along a folded edge. To
avoid cutting the fabric, use the multipurpose
foot. Pin tucks are suitable for children's clothes
and lady's blouses.
1. Use the left needle for wide tucks, the right
needle for narrow.
2. Snap on multipurpose foot and adjust guide.
(page 28)
3. Raise the presser foot.
4. The tension is set for normal overlock "N".
Model 910: Use stitch B or C.
Mark and press the pin tucks before sewing.
The differential feed ratio is normally "N".
5. Place the fabric under the presser foot with
the edge in line with the side of the stitch
plate, or guide on the multipurpose foot,
lower the presser foot and start serging.
Make a chain stitch at the end of the serging.
6. The tuck is pressed to one side when serging
is nished.
Tuck edge
–32–
—32—
The side of
the needle
plate.