Quick Reference Chart For Self-Diagnostic Mode - Toshiba 2060 Service Handbook

Normal
"C"
All the displays on
Warming up
the control panel lit
"06"
Standby
*1
*1 When the copier is in the adjustment mode which you entered by turning on the power switch while
pressing keys "0" and "5" simultaneously, pressing keys "0" and "9" simultaneously will make the
copier exit into the stand-by mode. In this stand-by mode only, you can access the adjustment
mode repeatedly by simply entering "0" and "5".
*2 While all the displays on the control panel are lit ("01" mode), copying is disenabled.
When the copier enters the standby status by pressing the CLEAR/STOP key, copying is enabled.
2060, 2860/70 ADJUSTMENT

Quick reference chart for self-diagnostic mode

Power ON
"02" "07"
"01"
(With ADF)
*2
Aging
"P" "C"
Stops momentarily
"09"
* "P": PRINT key on.
"C": CLEAR/STOP key on.
1 - 4
"03/04" "05"
Adjustment mode
Test mode
"09"
"09"
"05"
Dec. 1996 © TOSHIBA CORP.
"08"
Setting mode
"09"