Self-Diagnosis Modes - Toshiba 2060 Service Handbook

1.2 Self-Diagnosis Modes

Input
Mode
code
All-LEDs-lit "01"
Aging mode "02"
Test mode "03"
Test mode "04"
Adjustment "05"
mode
Forced ready "06"
mode
Aging mode
"07"
Setting mode "08"
Note: To access the desired diagnostic mode, turn on the power switch while pressing the appropriate keys.
<Procedure>
• All-LEDs-lit mode (01):
0 1
PWR
• Aging mode (02 or 07):
0 2
PWR
0 7
• Test mode (03 or 04):
For these test modes, refer to 1.2.1 and 1.2.2.
• Adjustment mode (05):
For this mode, refer to "1.2.3 Adjustment mode".
• Forced ready mode (06):
PWR
Note: This mode is for checking the paper feeding operation only.
• Setting mode (08):
For this mode, refer to "1.2.4 Setting mode".
Notes: C/S: Press the CLEAR/STOP key
PWR: Turn on the power switch
INT: Press the INTERRUPT key
E/S: Press the ENERGY SAVER key
Dec. 1996 © TOSHIBA CORP.
Definition
All LEDs on the control panel are lit.
Aging (RADF does not operate)
Motor test and input/output check
Motor test and input/output check
Adjustment of items
Forced entry of ready mode
Aging (includes RADF)
System switch over and setting of each
priority mode, PM counter, etc.
All LEDs light
Aging
C/S
PRINT
0 6 Forced ready
1 - 3
Cleaning
Display after selection
method
C/S
"09"
AGING
"09"
TEST MODE
"09"
TEST MODE
"09"
TEST MODE
–
"09"
AGING
"09"
TEST MODE
C/S Exit
0 9
Exit
2060, 2860/70 ADJUSTMENT
100%
100%
100%
100%
100%
100%