Usb Stick; Rf Interference; Warranty - CycleOps Club IC Service Manual

Indoor cycle

Test Information (Current Firmware Version, LCD, Backlight, Hub Heart Wheel, Torque, Data Ride and Data Test)

These tests only need to be performed when instructed by customer support staff. For questions please contact Saris Cycling

Group at 1-800-783-7257 (001 608 274 6550 international).

CHAPTER 6: USB STICK:

The USB Stick is a very important part of the CycleOps Power Training System. The USB Stick is used to both capture ride

data as well as move it from the bike to a personal computer for detailed post-ride analysis via PowerAgent software. The

console still works without the Stick, but ride data will not be captured and only analog heart rate straps can be used to

monitor heart rate while riding. For more information on the USB Stick, visit www.cycleops.com.

CHAPTER 7: RF INTERFERENCE:

If during use you are experiencing wireless drop out this is due to frequency interference. Wireless Internet access points,

microwaves, cordless phones, or other wireless devices may cause frequency interference. To mitigate the chance of

interference set wireless access points to the lowest channel possible, and keep bikes away for interfering devices. To

change the channel on your access point, please consult your manufacturers documentation or your technology staff.

CHAPTER 8:

WARRANTY

Frame - 15 years

Parts - 3 years (excludes wear items)

Pedals - 90 days

Electronics - 1 year

Saris Cycling Group, Inc. warrants its PowerTap products against defects in manufacturing and workmanship for a period of one year, beginning at the date of purchase, or from the date

of manufacture in the absence of a proof of purchase. In the event of a warranty issue, Saris Cycling Group, Inc. will repair or replace the item at its discretion. Saris Cycling Group, Inc. is

not responsible for any indirect or consequential costs or damages associated with the warranty of the product. Our products are not covered under warranty in cases exhibiting signs of

abuse, improper maintenance or installation, crash, using the product with non-compatible components, or using the product for purposes for which it was not designed. This warranty is

also void if the product has been modiﬁ ed from its original form, including changes in aesthetics, serial numbers or logos. Saris Cycling Group Inc., is not responsible for basic hub main-

tenance, such as re-packing bearings and bearing adjustments. Warranty Procedures If it appears that a PowerTap component is not working properly, please take the time to inspect and

troubleshoot the system as best as possible. In many instances, solutions may be as simple as replacing a bearing or adjusting a sensor. Often small parts can repaired at the shop, instead

of the longer and more expensive option of sending the unit back for repair. If you feel the need to warranty your PowerTap, please return your product through the channel that you

purchased it from or contact Saris Cycling Group, Inc. at 1-800-783-7257.

Copyright 2005. All rights reserved. No part of this publication may be copied, photographed, reproduced, translated, transmitted electronically or placed on digital media without the prior written consent of Saris

Cycling Group, Inc.

Trademarks

Saris Cycling Group, Inc , PowerTap and the PowerTap logo, are all registered trademarks of Saris Cycling Group, Inc. All other product, brand, or trade names used in this manual may be trademarks or registered trade-

marks of their respective owners.

Modiﬁ cations

Saris Cycling Group, Inc reserves the right to make improvements and/or updates to the products described herein at any time without notice.

FCC Statement of Compliance:

Statement of Compliance for FCC and Industry Canada:

"This device complies with Industry Canada and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation."

The term "IC:" before the radio certiﬁ cation number only signiﬁ es that Industry Canada technical speciﬁ cations were met.

Changes or modiﬁ cations to this device not expressly approved by the party responsible for compliance with FCC regulations (the manufacturer) could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a normal installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation

17711 04/07

Table of Contents