Center EHE0200153 User Manual page 9

Programming the EHE0200154
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set
between 3.00am and 2.50am the following day - allowing you to maintain the evening
temperature after midnight. Each temperature level can be set between 5°C and 35°C,
and adjusted in 0.5°C increments. The factory default program for heating is as follows.
Monday to Friday
(Day 1 to 5)
Saturday & Sunday
(Day 6 & 7)
Reviewing the Heating Program
To review or edit the heating program use the
between the 4 individual programming periods for that day. Use the
step through each day of the week, so the complete 7 day heating program can be
reviewed or edited.
Modifying the Heating Program
To change the heating program:
Press either of the
a. PROGRAM
to enter the programming mode. The time /
temperature settings for period
(Day 1) will be flashing as shown. The active
period is highlighted by a flashing square around
the numbers at the bottom of the screen and the
selected day is shown with the day indicator.
To adjust the period start time use the
b.
be displayed to confirm the change. Holding the button down will change the time
quickly.
Note: If you are pressing the
period, it means the next period will be pushed forward.
Once the required time is reached press the
c.
If the original time setting did not require adjustment press the
Note:
move to step 'd'.
Period
Time
Temperature
Period
Time
Temperature
or buttons
on Monday
1
or buttons and the display flashes the next
9
1 2
6:30 8:00
21°C 18°C
1 2
8:00 10:00
21°C 21°C
or buttons to navigate
PROGRAM
Mon Tue Wed
or buttons, the 'OK?' indicator will
button to confirm.
3 4
18:00 22:30
21°C 16°C
3 4
18:00 23:00
21°C 16°C
button to
DAY
Thu Fri Sat Sun
1 2 3 4
button to