Center EHE0200153 User Manual page 11

Operating the EHE0200154
Choosing the Operating Mode
The thermostat can operate in three different modes: Automatic, Manual or Off. To
set the operating mode press either of the AUTO, MAN or OFF buttons. The screen
indicates which mode is currently active by displaying AUTO, MAN or OFF.
• AUTO (automatic) mode sets the thermostat to follow the built-in temperature
program (default or personalised). Operating the thermostat in this mode is the best
way to maintain a high level of temperature comfort whilst maximising your energy
savings.
• MAN (manual) mode sets the thermostat to act as a simple thermostat with a
fixed setpoint throughout the day. The setpoint can be adjusted from 5°C to 35°C
by using the or
temperature until another operating mode or temperature is selected.
• OFF mode sets the thermostat to control to a minimum temperature setting of 5°C
(default) that acts as a frost protection measure for your home.
During Normal Operation
• Temperature Enquiry
In AUTO, MAN and OFF operating modes the thermostat will display the current
room temperature. To review the programmed 'target' temperature (the temperature
which the thermostat is trying to maintain) press the
temperature value will be displayed flashing for 5 seconds before returning to the
current room temperature value.
• Temperature Override
During normal operation (AUTO mode) the programmed temperature can be
adjusted manually by pressing the
temperature will be displayed and flash for 5 seconds - during this time the
buttons can be used to modify the set value.
Note: This temperature override is cancelled at the next programmed temperature
change.
Adjusting the Time
To adjust only the time during normal operation use the
the time and press the
buttons. The thermostat will continue to maintain this
or buttons or the
button again to confirm any changes.
11
button. This 'target'
button. The 'target'
or buttons to adjust
or