Two-Position Tailgate/Upper Load Platform - Dodge Dakota 2011 Owner's Manual

174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4. Slide the tailgate to the passenger side while making
sure clearance from the box and taillight is maintained.
To reinstall the tailgate, do the following:
1. Slide the tailgate onto the driver's side pivot.
2. Hold the tailgate at a 45 degree angle and insert it into
the passenger side pivot.
3. Clip the cables to the box.

Two-Position Tailgate/Upper Load Platform

Your tailgate can be opened to the full-open or the
partial-open position. The partial-open position is for
loading objects longer than the length of the bed (sheets
of plywood, etc.) by creating an upper load platform:
Installing Lumber
1. Place lumber across the box in the indentations pro-
vided above the wheel housings and in the bulkhead
dividers, to form the floor. There are indents in the sheet
metal (or bed liner if equipped) on the inner side of the box
in front (Club Cab only) and behind both wheel housings.
1 — Bulkhead Divider Slot
2 — Wheel Housing Indentions
2. Secure the tailgate in the partially-open position:
3. Open the tailgate slightly.