Dodge Dakota 2011 Owner's Manual page 77

Tether Straps at the Rear Passenger Seat (Crew Cab)
1. Route the child restraint tether strap under the head
restraint for the outboard seating positions, and then
through the anchor strap outer loop (webbing material
loop), located directly behind the child restraint.
2. Route the tether strap across to the nearest installed
anchor strap, and attach the tether strap hook to the
anchor strap inner metal ring.
3. Remove the slack in the tether strap so that both
anchor straps are pulled tight.
NOTE: Two anchors must be used for any of the three
seating positions.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75
Multiple Child Restraints
1 — Inner Anchor Strap Rings
2 — Snap Hook
3 — Tether Strap
4 — Passenger Side Rear Child
Seat
5 — Center Rear Child Seat
6 — Drivers Side Rear Child
Seat
2