hilscher CIFX 50-XX User Manual page 141

Technical Data
CIFX 100EH-RE
Power supply
Operation
Environmental
Conditions
Device
CE Sign
UL Certification
Configuration
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM39EN | Revision 39 | English | 2014-01 | Released | Public
Parameter
Supply Voltage
Maximum Current at 3,3 V
(typically)
Connector
Rotary Switch Slot Number
(Card ID)
Operating temperature range*
*Air flow during measurment
Storage temperature range
Humidity
Environment
Dimensions (L x W x H)
Mounting/Installation
Master License
RoHS
CE Sign
Emission
Immunity
The device is certified according
to UL 508.
Configuration Software
Master and Slave
5
The term "x4" refers to the convention of the PCI Express specifications [bus
spec 3] to the number of lanes in the slot.
Value
The meaning of the following LEDs depends on the loaded
firmware:
COM 0
LED Communication Status 0 (duo LED)
COM 1
LED Communication Status 1 (duo LED)
LED yellow
at RJ45Ch0 and RJ45Ch1,
for Ethernet Link status, Ethernet Aktivity
LED green
status and additional status
Refer to chapter LED Descriptions, page 78.
+3,3 V dc ±5 %, refer to section Power Supply and Host
Interface, page 33.
800 mA
Via PCI Express Bus
To set the Slot Number (Card ID)
0 °C ... +65 °C
0,5m/s
0 °C ... +70 °C
10 ... 95% relative humidity, no condensation permitted
For UL compliant usage:
The device must be used in a pollution degree 2
environment.
110,0 x 69,0 x 18,5 mm
PCI Express x4 slot (3.3 V), refer to section Slot for the PC
Cards cifX PCI, PCIe and Low Profile PCIe, page 32.
5
x4 = Four Lane; In the PCI Express x4 slot only lane 0 is used.
For further details refer to section Pin Assignment for PCI Express
Bus CIFX 100EH-RE\CUBE on page 108.
NXLIC Master (Part No 8211.000)
Yes
Yes
EN 55011:2009 + A1:2010, CISPR 11:2009, Class A
(Radio disturbance characteristics - Limits and methods of
measurement)
EN 61000-4-2:2009 (Electrostatic discharge test)
EN 61000-4-3:2006 + A1:2008 + A2:2010 (Radiated,
radio-frequency, electromagnetic field test)
EN 61000-4-4:2004 + A1:2010 (Burst Electrical fast
transients/burst test)
EN 61000-4-5:2006 (Surge test)
EN 61000-4-6:2009 (to conducted disturbances, induced
by radio- frequency fields)
EN 61000-4-8:2010 (power frequency magnetic field test)
EN 61000-6-2:2005 + B1:2011 (for industrial
environments)
UL-File-Nr. E221530
SYCON.net
141/184
© Hilscher, 2008-2013