Advertisement
Quick Links
Advertisement
Related Manuals for Bang & Olufsen Beolink Active
Summary of Contents for Bang & Olufsen Beolink Active
- Page 1 B E O L I N K ® A C T I V E...
- Page 2 For the US-market only! NOTE: This equipment has been tested and CAUTION found to comply with the limits for a class B RISK OF ELECTRIC SHOCK digital device, pursuant to part 15 of the FCC DO NOT OPEN Rules. These limits are designed to provide reasonable protection against harmful inter- CAUTION: To reduce the risk of ference in a residential installation.
- Page 3 The central room is the room in This guide describes how to install The BeoLink distribution system which you have placed your audio your BeoLink Active kit in a Beo- enables you to control your system and/or video system (the Link distribution system.
- Page 4 P L A C E M E N T To fasten the BeoLink Active receiver to the wall: 1 Using the wall bracket as a template, mark and drill the holes in the wall. 2 Using the two screws and wall plugs supplied (A), fasten the wall bracket.
- Page 5 Using the cable supplied, connect the BeoLink Active receiver as follows: 1 Detach the rear cover of the BeoLink Active receiver (unscrew the two screws (C) and loosen the two screws (D), then lift off the cover).
- Page 6 In the local room: Using a BeoLink cable, connect the multi- pin plug to the socket marked MASTER LINK on the BeoLink Active box, and run the cable to the junction box. Using Power Link cables (8-pin DIN), connect your active speakers to the sockets marked POWER LINK.
- Page 7 BeoLink Active (to re-enable remote control, select one of the other options). Option 4: To be used if you install the BeoLink Active in the same room as your central system (e.g. in a large L- shaped living room with two separate listening positions).