Bang & Olufsen BeoLink Active User Manual page 11

Nice to know...
• Pressing MUTE on the Beolink terminal,
while the BeoLink Active is in stand-by,
corresponds to pressing PLAY • directly on
the BeoLink Active receiver (see page 5).
• If you try to switch on a source in your main
Bang & Olufsen system, and you get the
sound from a different source in your
BeoLink Active speakers, it may be because
a recording (audio or video) is progressing
in your main system. You will then be
hearing the sound that is being recorded
instead. This special "lock" function ensures
that the recording will not be spoiled.
• To start playback on a Bang & Olufsen
record player in your main system, just press
the PHONO button. Pressing L or M while
you are listening to a record will make the
record player step through the music in 8
mm steps.
• To start playback on a secondary audio- or
video tape recorder in your main Bang &
Olufsen system, press SHIFT then A.TAPE or
V.TAPE.
• To switch on a DVD/CDV player connected
to your main video system, press SHIFT then
SAT.
• To switch mono/stereo sound or language
on a radio, TV or satellite program; or to
switch sound track on a video tape, press
SHIFT then SOUND – repeatedly.
• If you use your BeoLink Active setup in the
same room as your main Bang & Olufsen
system, you must program the BeoLink
Active accordingly (see how in the Setting-
up guide). In that case, to start playing a
source in your main system via your BeoLink
Active speakers, press:
LINK then RADIO, CD, or A.TAPE
or
LINK, AV then TV, SAT or V.TAPE.
11