Bang & Olufsen BeoLink Active User Manual page 10

10
>Remote operation
Audio sources...
Switches on the radio
RADIO
Starts the CD player
CD
Starts the tape recorder
A. TAPE
To "turn" the tape to play the other
side, press SHIFT then SOUND
Video sources...
Switches on the TV
TV
SAT
Switches on to satellite TV
V. TAPE
Starts the video tape recorder
Press to step through your programs;
or to step from track to track on a
or
CD or a tape
Alternatively, key in the exact
0
program or track number you want
through
9
Press to pause your CD player, or
STOP
your audio or video tape recorder
(Press STOP twice to stop the VTR
completely before winding)
Rewinds a tape; searches backwards
or on a CD
Fast forwards a tape; searches
forwards on a CD
Press to resume playing
PLAY
Press briefly to switch off the
G
BeoLink Active
Using the Beolink 1000
remote control
The Bang & Olufsen Beolink 1000
remote control may also be used to
operate the BeoLink Active.
For detailed information about Beolink
1000 operation, please refer to the
Beolink 1000 User's guide.
In order to adjust sound in your
BeoLink Active setup, you must use the
SOUND button on the Beolink 1000
remote control:
• Press SOUND once to adjust balance
• Press SOUND twice to adjust bass
• Press SOUND three times to adjust
treble
• Press SOUND four times to adjust
loudness
Note: For the actual adjusting, you must use the
<< >>
buttons to adjust balance and the L and
or
M buttons to adjust bass, treble, and loudness.