Connecting Parallel Devices; Lan Connection - Medion PC Manual

Connecting Parallel Devices

Diagram reference: P
(optional feature)
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
Use a doubly screened, parallel connection cable (25-pin) to connect a printer:
1. Connect the printer cable from your printer to the red printer socket P on the rear
of your PC.
2. Hand-tighten the screws of the printer cable.
If you wish to use a scanner, which also connects to the PC via the parallel interface,
follow the instructions above. With the PC parallel port in use, the printer can be con-
nected directly to the scanner. You will have use of both devices if they are connected in
this manner.

LAN Connection

Diagram reference: Q
Your PC is equipped with a network connection, in order to prepare it for network opera-
tion.
The network cable usually has two RJ45 plugs so that it is unimportant which plug is
connected to which jack.
1. Connect the one plug of the cable to the PC jack.
2. Connect the other plug to the other PC or hub/switch.
For further information refer to chapter "The Network" starting at page 40.
- 18 -