Connecting Esata Devices; Remove Esata Devices; Lan Connection - Medion Akoya P5315 D Instruction Manual

Connecting eSATA Devices

Diagram reference: G
eSATA stands for "external Serial ATA" and is used for connecting external hard disks.
Unlike common USB standards, the transmission speed of an eSATA connection is higher
than that of external USB hard disks.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. Connect the cable to the eSATA socket in the front of your PC.

Remove eSATA Devices

1. Before removing an eSATA hard disk from your PC, click on the icon "Safely remove
hardware" in the task bar and then on the hard disk to be removed.

LAN Connection

Diagram reference: K
Your PC is equipped with a network connection, in order to prepare it for network opera-
tion.
The network cable usually has two RJ45 plugs so that it is unimportant which plug is con-
nected to which jack.
1. Connect the one plug of the cable to the PC jack.
2. Connect the other plug to the other PC or hub/switch.
For further information refer to chapter "The Network" starting at page 39.
UK/ N. IRELAND HELPLINE 0871 3761020
(costs 7p/min from a BT landline, mobiles costs may be higher)
REP. IRELAND HELPLINE 1-800-992508
- 15 -