Table of Contents
Advertisement
Available languages
Available languages
outside of the filter to clean the dust
particles.
Install the filter and reattach the
grounding clip.
Note:
Wearing a particle mask/respirator for
protection against fine dust particles
during cleaning is highly
recommended
Clean the canister filter frequently to
keep the sander's performance at its
optimum.
9. Trouble shooting
Motor doesn't start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
Machine vibrates excessively
*Stand on uneven floor-
adjust stand for even support.
Sanded edge not square
*Table not square to sanding disc-
Adjust positive stop for 90°.
Sanding marks on the wood
*Workpiece was held still-
keep workpiece moving.
*Wrong grit sanding disc-
use coarser grit for stock removal
and fine grit for finish sanding.
*Feed pressure too high-
never force the wood.
10. Environmental protection
Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.
10. Available accessories
Stock number 708438
Open stand.
Stock number 708434
Canister filter
Refer to the JET-Pricelist
for various grit sanding discs.
7
Advertisement
Chapters
Table of Contents
