Mapping Vcr Plus+ Channels Manually - RCA VR556 User Manual

VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+:
VCR Plus+ data was not
found.
VCR+ Channel
5
4
3 -> -> -> --
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR+ Channel
5
4
3 -> -> -> 23
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
(Screen shown is for an example only.)
Chapter 4

Mapping VCR Plus+ Channels Manually

Using the VCR Plus+ SIL VER system can make taping timer r e cordings for cable or
off-air antenna easier. If your VCR Plus+ SIL VER system setup failed during the
QuickSet, then you will need to map the channels for your local service manually. A
worksheet and abbreviated codes for typical cable services in the U.S. and Canada
are provided.
1. Press the MENU button to display the VCR MAIN MENU.
2. Press the 4 button to choose CHANNELS.
3. Press the 4 button to choose VCR Plus+ Setup.
4. Press 1 to display the Set Channel Lists menu.
ON
5. Enter the data following the on-scr e en directions using
My Channel
--
your worksheet.
--
--
--
My Channel
46
--
--
--
VCR Features
35