Mapping Vcr Plus+ Channels Manually - RCA VR661HF User Manual

Mapping VCR Plus+ Channels Manually

Using the VCR Plus+ SILVER system can make taping timer recordings for cable or off-air antenna
easier. If your VCR Plus+ SILVER system setup failed during the QuickSet, then you will need to map
the channels for your local service manually. A worksheet and abbreviated codes for typical cable
services in the U.S. and Canada are provided.
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+:
VCR Plus+ data was not
found.
0 Exit
VCR+ Channel
5
4
3 -> -> -> --
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR+ Channel
5
4
3 -> -> -> 23
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
(Screen shown is for an example only.)
Chapter 4
1. Press the MENU button to display the VCR MAIN MENU.
2. Press the 4 button to choose CHANNELS.
3. Press the 4 button to choose VCR Plus+ Setup.
4. Press 1 to display the Set Channel Lists menu.
ON
5. Enter the data following the on-screen directions using
My Channel
your worksheet.
--
--
--
--
My Channel
46
--
--
--
VCR Features
35