Table of Contents
Advertisement
STEP 4: PLUG IN THE VCR
Match the wide blade of the plug with the wide slot in the
outlet.
Be sure to insert the plug completely.
STEP 5: TUNE
THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input, depending
on
the connection
you've chosen.
•
If you connect your VCR using the ANTENNA connectors with
RF coaxial cable, set the 3CH4 switch to channel 3 or channel
4_the
channel you want to use on your TV.
If you connect your VCR using the AUDIONIDEO
jacks with
audio/video
cables, select the TV's video input to see the
signal. See the 11/Owner's Manual
STEP 6: TURN
ON THE VCR
Press POWER on the VCR's front panel, or VCR on the remote to
turn on the VCR. The VCR will begin Auto Channel Search. Once
your local channels are stored in memory, the VCR searches for a
channel carrying XDS (Extended Data Services) information
to
automatically
set the time.
To complete
setting
up the VCR0you will need to understand
how to move through
and change items in the on-screen menus.
STEP 7: ACCESS THE MENUS
The MENU and number
buttons let you access, select and change
menu items. For example, to change the AUTO PLAY setting, you
would do the following:
5
Advertisement
Table of Contents
