Using Your Remote Control; Arming The Security System; Passive Arming Bypass; Bypassing The Shock Sensor - Code Alarm CA 6151 Owner's Manual

Professional series deluxe vehicle security and remote start system
Hide thumbs Also See for CA 6151:
Table of Contents

Advertisement

Using Your Remote Control

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the
parking lights will flash 2 times, indicating the system is armed, has locked the
doors (if equipped and connected) and activated the starter disable feature. The
LED status indicator will blink steadily, once per second.
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the
vehicle.

Passive Arming Bypass

If passive arming is enabled on your system, while the system is disarmed, press
+
, the system will respond with 1 chirp and the LED will turn on. The
security system will remain in this temporally bypassed state for as long as you
wish. To exit passive bypass, press the
to normal status.

Bypassing The Shock Sensor

To arm the system and ignore the shock sensor press
seconds press
NOTE: The system will only change the shock sensor setting for one arm cycle
and will be defaulted back to normal operation the next time the system is armed.

Hidden Alarm Function

Press the
hidden alarm function. The security system will arm with "Hidden Alarm Function"
in which the siren / horn will be silenced if the system is triggered.

Disarming the Security System

To disarm the system press the
indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is defaulted with Silent Choice enabled, which requires a
second press of the
vehicle. If your system is set up for 2 step unlock, a third press of
the audible response.
*Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 2 seconds.
2010 Audiovox Electronics Corporation. All rights reserved.
button to activate an audible arming response from the
+
, the system will respond with 1 long chirp.
button first, within 3 seconds press the
button to activate an audible arming response from the
or
button and the system will return
button. The parking lights will flash 1 time,
button. The
button, then within 5
button to activate the
will activate
3

Advertisement

Table of Contents
loading

Table of Contents