Table 2-2: CAN bus Connector Pin Assignment
Pin No.
1
2
3
4
5
Figure 2-4: CAN bus Connector on the GW-7238D
Note that the bypass CAN bus connector is not another CAN channel.
It is designed for connecting to another CAN device conveniently. The
structure of the inside electronic circuit is displayed as figure 2-5.
Figure 2-5: Electronic circuit of CAN bus connector
2.2.3 Ethernet Connect
The Ethernet (10/100 Base-TX) signals are routed to an RJ45 socket
for easy connection using a standard CAT 3 or CAT 5 network cable. On
power on of the GW-7238D, it will auto-negotiate the network speed and
connection.
GW-7238D J1939 to MBTCP Server / MBRTU Slave Gateway User's Manual (Ver.1.0, Nov. 2011) --- 10
Name
N/A
CAN_L
CAN_L bus line (dominant low)
N/A
CAN_H
CAN_H bus line (dominant high)
N/A
Description
Not Connected
Not Connected
Not Connected