Gw-7238D Utility Configuration; Modbus Network Configuration; J1939 Network Configuration - ICPDAS GW-7238D User Manual

Figure 5-5: Connection Interface of GW-7238D Utility

5.2 GW-7238D Utility Configuration

5.2.1 Modbus Network Configuration

The GW-7238D and the controller must be set the same serial
communication parameters or be on the same subnet via Ethernet
communication of the Modbus network configuration.
The Modbus network configuration screen from the GW-7238D is
shown as Figure 5-6.

5.2.2 J1939 Network Configuration

The device NAME should be set according to the application and the
vendor where the module is being used based on the J1939 network
specification.
The J1939 network configuration screen from the GW-7238D is shown
as Figure 5-7.
GW-7238D J1939 to MBTCP Server / MBRTU Slave Gateway User's Manual (Ver.1.0, Nov. 2011) --- 40
Figure 5-6: Modbus configuration screen