ICPDAS GW-7238D User Manual page 52

GW-7238D J1939 to MBTCP Server / MBRTU Slave Gateway User's Manual (Ver.1.0, Nov. 2011) --- 52
4. Reset the power of the GW-
7238D, and the GW-7238D
would back to factory defaults.
6. Reconnect the GW-7238D by
using the serial network
setting as 115200 baud with
none parity, 1 stop bit and 1
Net ID; or run the Ethernet
network and set on the same
subnet to connect via IP
address(192.168.255.1)