Call Park: Placing A Call On Hold To Page - LG-Ericsson iPECS LIP-8008E User Manual

LIP-8008E
In iPECS-MG
To set-up a Conference Room:
•
Press the
•
Dial 54 to create a Conference Room,
•
Dial the desired Conference Room number (571-579),
•
If desired enter a password for the Conference Room (up to 12
digits),
•
Press
To join a Conference Room:
•
Lift the handset,
•
Dial 571-579 (Conference Room entry code),
•
Dial the Conference Room password.
To delete a Conference Room:
•
Press the
•
Dial 55 (Conference Room delete code),
•
Dial the Conference Room number (571-579),
•
Dial the Conference Room password,
•
Press

4.5 Call Park: Placing a call on hold to Page

In iPECS-LIK
To park an active external call:
•
Press T
•
Dial the Park Orbit code (601-610 for iPECS SBG-1000 &
Micro & 50 & 100, 601-619 for iPECS-300 & 600 or 601-800 for
iPECS-1200),
•
Return to idle.
To retrieve a parked call:
•
Lift the handset,
•
Dial the Park Orbit code (601-610 for iPECS SBG-1000 &
Micro & 50 & 100, 601-619 for iPECS-300 & 600 or 601-800
for iPECS-1200).
/ button,
TRANS PGM
/ to establish the Room.
HOLD SAVE
/ button,
TRANS PGM
/ to delete the Conference Room.
HOLD SAVE
A user may transfer an active CO/IP call to a special
holding location (Park Orbit), which can be accessed
easily from any station in the system. Typically, this
feature is used with Paging to notify the desired User of
Call Park.
Parked calls are subject to Hold Recall after the Call
Park timer.
/P ,
RANS GM
32
User Guide