Call Park: Placing A Call On Hold To Page - LG-Ericsson iPECS LDP-9200 Series User Manual

•
Dial the Conference Room password.
Or, press a preprogrammed
To transfer a call to a Conference Room:
•
Press the
•
Dial 59 (Conference Room Entry code),
Or, Press a Conference Room flex button,
•
Hang up.
To delete a Conference Room:
•
Press the
•
Dial 54 (Conference Room delete code),
•
Dial the Conference Room number (1-9),
•
Dial the Conference Room password (5 digits),
•
Press

5.5 Call Park: Placing a call on Hold to Page

A user may transfer an active CO/IP call to a special holding
location (Park Orbit), which can be accessed easily from any
station in the system. Typically, this feature is used with
Paging to notify the desired user of a parked call.
Parked calls are subject to Hold Recall after the Call Park timer.
To park an active external call:
•
Press
•
Dial the Park Orbit (eMG80:#601-#619, eMG800/
UCP:#601-#800),
Or, press a Park Orbit flex button,
•
Return to idle.
To retrieve a parked call:
•
Lift the handset,
•
Dial the Park Orbit.
button,
/
TRANS PGM
button,
/
TRANS PGM
to delete the Conference Room.
/
HOLD SAVE
,
/
TRANS PGM
button.
Conf
40