Section 5. System Setup - Trane 18-HD64D1-4 Installation Manual

Section 5. System Setup

5.1
Power-Up
Communicating Equipment
Discovery mode begins when the Control is first installed and power is connected. For communicating
equipment, the Control automatically configures standard equipment parameters.
24V Equipment (Using a Relay Panel)
Equipment will need to be configured manually through the Installer's Setup menu in the Control. See the
following section for more details.
Power-Up Sequence
When the 950 Control is connected to the Sub Base, the Control will initiate a 90-120 second power-up
sequence. During the power-up sequence, the Screen Calibration option is available for five seconds. If the
screen is not pressed within five seconds, the 950 Control will default to previously stored Screen Calibration
settings.
Note: The 950 Control is factory calibrated and can be recalibrated at any time by rebooting the Control and
selecting Screen Calibration option within the five seconds following power-up.
18-HD64D1-4 9