Chevrolet 2013 VOLT Owner's Manual page 246

10-44 Vehicle Care
When using the tyre sealant and
compressor kit during cold
temperatures, warm the kit in a
heated environment for five minutes.
This will help to inflate the tyre
faster.
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard
Warning Flashers on page 6 3.
Do not remove any objects that
have penetrated the tyre.
1. Remove the tyre sealant and
compressor kit from its storage
location.
1.1. Open the tailgate. See
Tailgate on page 2 11.
1.2. Lift the cover.
1.3. Remove the tyre sealant
and compressor kit.
2. Unwrap the sealant/air hose (6)
and the power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground
so the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
anticlockwise.
5. Attach the sealant/air hose (6)
onto the tyre valve stem. Turn it
clockwise until it is tight.