Chevrolet 2013 VOLT Owner's Manual page 149

The air conditioning and electric
heat could be on at the same time
when dehumidifying is required in
ECO or Comfort modes.
In Fan Only mode, occasionally the
air conditioning and/or heating
status will be on if the Auto Defog
function is enabled and high
humidity is detected. See "Climate
and Air Quality" under Vehicle
Personalisation on page 5 50, for
details on enabling or disabling the
Auto Demist function.
The air conditioning may also run if
0
is selected, regardless of the
climate mode.
Automatic Operation
The system automatically controls
the fan speed, air delivery mode,
and recirculation to heat or cool the
vehicle to the selected temperature.
When the AUTO indicator light is
on, the system is in full automatic
operation. If the air delivery mode,
fan speed, or recirculation setting is
adjusted, the AUTO indicator turns
off and the selected settings display.
For automatic operation:
1. Press AUTO.
2. Set the temperature. An initial
setting of 23°C (74°F) is
recommended. Allow the system
time to stabilise. Adjust the
temperature as needed.
/ (Temperature Control):
Press to increase or decrease the
temperature.
Auto Defog: The system monitors
high humidity inside the vehicle.
When detected, the system may
adjust to outside air supply and turn
on the air conditioner or the heater.
The fan speed may slightly increase
to help prevent misting. When high
humidity is no longer detected, the
system will return to its prior
operation. To turn Auto Demist off or
on, see "Climate and Air Quality"
under Vehicle Personalisation on
page 5 50.
Climate Controls
Manual Operation
A
(Fan Control): Press the fan
control buttons or the touch screen
fan control, to increase or decrease
the fan speed. The fan speed
setting displays. Press AUTO to
return to automatic operation. To
turn the fan or climate control
system off, press the fan down
button repeatedly.
If the fan is manually turned off
while in ECO or Comfort mode, the
display will automatically change to
Fan Only mode. When the fan is
turned back on either by manually
increasing fan speed or pressing the
AUTO button, the climate mode will
revert back to ECO or
Comfort mode.
Air Delivery Mode Control: Press
CLIMATE to select the Climate
touch screen. Press the air delivery
mode touch screen button to
change the direction of the airflow.
The selected air delivery mode
button is lit. Pressing any of the air
delivery buttons cancels automatic
8-5