Chevrolet 2013 VOLT Owner's Manual page 188

9-34 Driving and Operating
WARNING (Continued)
before reversing may result in
injury, death, or vehicle damage.
Always check behind and around
the vehicle before reversing.
How the System Works
When the vehicle is shifted into
R (Reverse), the image of the area
behind the vehicle appears in the
centre stack display The previous
screen displays when the vehicle is
shifted out of R (Reverse) after
approximately 10 seconds.
To cancel the delay, do one of the
following:
Press a button on the
infotainment system.
Shift into P (Park).
Reach a vehicle speed of
8 km/h (5 mph).
Turning the Rear Vision Camera
System On or Off
To turn the RVC system on or off:
1. Shift into P (Park).
2. Press the CONFIG button on the
centre console.
3. Select Display.
4. Select Camera. When a tick
appears next to Camera, then
the RVC system is on.
Symbols
The navigation system may have a
feature that lets the driver view
symbols on the navigation screen
while using the RVC. The parking
assist system must not be disabled
to use the caution symbols. The
error message REAR PARKING
ASSIST SYMBOLS UNAVAILABLE
may display if parking assist has
been disabled and the symbols
have been turned on. See
Ultrasonic Parking Assist on
page 9 31.
The symbols appear and may cover
an object when viewing the
navigation screen when an object is
detected by the parking assist
system.
To turn the symbols on or off:
1. Shift into P (Park).
2. Press the CONFIG button on the
centre console.
3. Select Display.
4. Select Symbols. When a tick
appears next to Symbols,
symbols will appear.
Guidelines
The RVC system may have a
guideline overlay that can help the
driver align the vehicle when
reversing into a parking spot.
To turn the guidelines on or off:
1. Shift into P (Park).
2. Press the CONFIG button on the
centre console.
3. Select Display.