Time
Start
Clr
Date
Exit
Stop
Time
Call Metering
Call Duration
You can measure the elapsed time of your call. The
feature can be activated when your phone is ready for
dialling (internal dial tone is heard) , during an outgoing
call, or when you have a voice connection.
Note: System dependent. It can also be possible
to activate Call Duration when your phone is idle.
Press to activate the Call Duration feature (see
display).
The display shows:
Press to start time measurement (see display).
The elapsed time is shown.
Press to clear the time measurement (see display).
Press to show date (see display).
Press to exit the call Duration feature (see display).
Other key functions that are available during call duration
mode:
Press to stop the time measurement (see display).
Press to show time measurement (see display).
Ericsson Dialog 4223
24