EnGenius M5000 User Manual page 75

Wireless outdoor access point / client bridge

Hide thumbs Also See for M5000:

Table of Contents

6. Press Management VLAN to configure wired VID. Enter your desire VLAN ID and press Apply to

configure the changes.

Auction: After press Apply, you must configure your Layer2 Switch or RADIUS Server with the same VLAN ID. Otherwise,

you cannot access to the device's web-base configuration page.

7. For 802.1x authentication, you may construct your network as below diagram.

Note: EnGenius product supports maximum 4 different SSID with different VLAN ID.

Table of Contents

Eoc5611p