Client Router - EnGenius M5000 User Manual

Wireless outdoor access point / client bridge

Hide thumbs Also See for M5000:

Table of Contents

WDS Bridge

Step1

Step2

Step3

Step4

Step5

Step6

Step7

Step8

Step9

Auction: Each WDS bridge's device must use the same Subnet, Wireless Mode, Wireless Channel,

and Security Setting.

9.4 Client Router

In the Client Router Mode, the M5000 has DHCP Server build inside that allows many LANs

automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and

connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode.

Select your country or region's regulation.

Select Operation Mode to WDS Bridge from System Properties.

802.11a wireless network.

Select channel you would like to use.

Setup the authentication settings

Setup WDS Link Settings.

Specify the AP's MAC address you would like to connect with.

Press Apply to process all the configurations.

Table of Contents

Eoc5611p