Mesh - EnGenius M5000 User Manual

Wireless outdoor access point / client bridge

Hide thumbs Also See for M5000:

Table of Contents

Please refer to the last section to check Access point's configuration.

Client Router

Step1

Step2

Step3

Step4

Step5

Step6

Step7

Step8

Step9

Step10

Auction: Client Router's IP setting must match to the Access Point's subnet.

9.5 Mesh

In order to construct the Mesh Network, the following configuration must be the same.

Select your country or region's regulation.

Select Operation Mode to Client Router from System Properties.

Change your Local Area Network setting to Obtain an IP Address Automatically.

802.11a wireless network.

Use site survey to scan Access Points that are available in nearby area.

Select the AP you would like to associate with.

Setup the authentication settings that match to the Access Point's setting.

Setup your WAN connection type given by your Internet Service Provider from WAN

Settings.

Press Apply to process all the configurations.

Table of Contents

Eoc5611p