Table of Contents
Advertisement
Internet Access Configuration
To configure this device for internet access, you must have IE 5.0 / Netscape 4.5 or above installed
on your computer. There is basically one way to configure your device before you are able to
connect to the internet: Web Interface. Configuration of this method will be discussed in detail in
the following section.
Configuring with your Web Browser
Open your web browser, enter the IP address of your Ethernet Adapter which by default is
192.168.1.1. A user name and password window prompt will appear. The default username and
password are "admin" and "admin".
Congratulations! You are now successfully logon to the PLI-3411 200Mbps Powerline Wireless
Access Point!
If the authentication succeeds, the homepage will appear on the screen.
24
Advertisement
Table of Contents
