Table of Contents
Advertisement
Setup
Local Area Network (LAN) Settings
To set up the configuration of LAN interface, private IP of your router LAN port and subnet mask for
your LAN segment. Default IP is 192.168.1.1.
From the Configuration menu, click on LAN. The following page is displayed:
Field
Internal IP Address
Netmask
MTU
DHCP Server Settings
The device provides DHCP server service in order to offer IP addresses to the computers within a LAN.
From the Configuration menu, click on DHCP Server. The following page is displayed:
Field
DHCP Service
DHCP Starting IP
Address
Max DHCP Clients
Lease
The IP of your Router LAN port (default 192.168.1.1).
Select Netmask from the drop-down list. Subnet Mask of you LAN
(default 255.255.255.0). All devices on the network must have the
same subnet mask to communicate on the network.
Maximum transmission unit: up to 1500 bytes.
Select Enable/Disable to enable/disable DHCP Server.
The DHCP starting IP addresses offered by the DHCP Server.
The maximum number of the IP addresses supported by the DHCP
server
Please choose lease time from the drop-down list. You can choose
1 Hour, 3 Hours, 6 Hours, 1 Day, 3 Days, or 7 Days.
37
Description
Description
Advertisement
Table of Contents
