Table of Contents
Advertisement
WDS Wireless Settings
From the Wireless menu, click on WDS. The following page is displayed:
Field
WDS
MAC Address
[1~4]
*Please make sure of the following settings in order to allow WDS to work effectively:
(1) WDS bridged devices must use the same radio channel.
(2) WDS bridged devices must use the same encryption mode and encryption keys.
Please Note: If one of the above fails, WDS devices cannot communication with each other.
Select Enable to enable WDS function. Select Disable to disable WDS
function.
Enter the MAC addresses of the other bridged wireless devices. Maximum
of 4 devices are allowed to be bridged together.
Description
45
Advertisement
Table of Contents
