Makita JN3200 Instruction Manual page 4

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in
SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful to the motor.
Nibbler & Standard Equipment
0
Washer
.........................................
2
(For die installation height adjustment)
0
Hex wrench
...................................
1
0
Wrench ( 5 0 )
..................................
1
4