Table of Contents
Advertisement
Quick Links
INSTALLATION AND OWNER'S OPERATING INSTRUCTIONS
READ
BEFORE OPERATING YOUR SUMMERAIRE FURNACE.
THIS FURNACE MUST BE INSTALLED AND SERVICED BY A QUALIFIED INSTALLER
AND WHERE REQUIRED BY LAW, A LICENCED TECHNICIAN.
Note: THIS FURNACE IS IN COMPLIANCE WITH THE CSA STANDARD, B140.0.03, (BLOCKED FLUE).
THEREFORE, THE "BLOCKED VENT SAFETY SWITCH": (MODEL #WMO-1) SUPPLIED WITH THIS FURNACE
MUST BE INSTALLED IN ACCORDANCE WITH THE INSTRUCTIONS INCLUDED WITH THE CONTROL
AND MUST BE MOUNTED WITHIN 6" OF THE BREACH OF THE FURNACE.
SEE SPECIAL INSTRUCTIONS IN INSTRUCTION MANUAL & FURNACE LABEL
INSTALLATION and OPERATING
INSTRUCTIONS
SUMMERAIRE
GAMME SMO
RME 111
AND UNDERSTAND THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR REFERENCE
POWER SIDEWALL VENTING
SUMMERAIRE MFG.
PETERBOROUGH, ONTARIO
FOR
SERVICE CALL:
NAME : __________________________
ADDRESS : ______________________
__________________________________
TELEPHONE : ____________________
RME 111
Advertisement
Table of Contents
Related Manuals for SummerAire RME 111
Summary of Contents for SummerAire RME 111
- Page 1 INSTALLATION AND OWNER’S OPERATING INSTRUCTIONS RME 111 READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE OPERATING YOUR SUMMERAIRE FURNACE. SAVE THESE INSTRUCTIONS FOR REFERENCE THIS FURNACE MUST BE INSTALLED AND SERVICED BY A QUALIFIED INSTALLER AND WHERE REQUIRED BY LAW, A LICENCED TECHNICIAN.
- Page 2 Installation Instructions nstallation of the furnace Summeraire Model - RME 111 Location This furnace is to be installed by a qualified technician. Some jurisdictions may require the installer to be Locate the furnace as closely as possible to the chimney, licenced.
- Page 3 Note: Combustion Safety Control proper operation and maximum efficiency, the RIEL- Operation and checking of the primary control is outlined LO Burner must be set up exactly as shown on the in detail with the enclosed manufacturer literature. enclosed specification sheet. Settings for “Nozzle Pressure”, “Burner Turbulator Setting”, and “Burner Air Cleaning Procedure...
-
Page 4: Specifications
Summeraire Model RME - 111 Specifications NOZZLE - U.S.G.P.H.* INPUT - U.S.G.H. .1.00 INPUT - B.T.U.H. 90610 104550 118490 139400 OUTPUT - B.T.U.H. 75000 86000 96000 111000 NOZZLE PRESSURE (psig) BURNER TURBULATOR SETTING BURNER AIR SETTING TEMP. RISE °F 85°... - Page 7 Model RME 111 is C.S.A. certified for use with Tjernlund SS1-C power side wall ventor. When RME 111 is installed with SS1-C side wall ventor use 20 AMP circuit protection. The Restrictor Plate supplied MUST be installed in the 6” portion of the Flue Pipe.
- Page 8 To maintain maximum operating efficiency and comfort Never burn garbage or paper in the heating system, and from your Summeraire Furnace, it should be serviced at never leave paper or rags around the unit. least once a year by a licenced burner mechanic. The fol- lowing maintenance procedures should be performed by Do not clean combustion chamber.
Need help?
Do you have a question about the RME 111 and is the answer not in the manual?
Questions and answers