3.
Snap two halves of
ground sleeve (4)
together.
Insert and secure
bottom pole section
(3) into ground sleeve
(4) by tightening
ground sleeve cap (5).
NOTE: Flared end
goes inside ground
sleeve.
4
3
5
4
Fill hole approximately 1/3
4.
full with mixed concrete.
5.
IMPORTANT!:
DO NOT WAIT FOR CONCRETE TO CURE.
Insert ground sleeve assembly and center
in hole (FIG. A).
FIG. A
Note: Leave 1" below flange exposed
for drainage hill.
FLANGE
CONTINUE ON TO NEXT STEP.
9
SIDE VIEW
PLAYING SURFACE
1" (2.54 cm)
IMPORTANT!:
NOTE POSITION OF
10/04
FLANGE
P/N 21168202