•
To turn this feature off, press the BACK pad
for 3 seconds. The control returns to the
FEATURES screen where SABBATH was
originally selected.
Note: This feature remains active even after loss
of power to the oven. The only way to exit
SABBATH is to hold the BACK pad for 3 seconds.
If power is lost while the Sabbath mode is in a
heating cycle, the heat will be off when the power
is restored.
Sales Mode
•
Becomes active upon powering up with 120V
only (L1-L2 = 120V, L2 connected to N).
•
This mode is NOT accessible on 240V/208V
power input. Sales mode requires a special
120 VAC cord (oven L1 connected to power
cord L, oven L2 and N connected to power
cord N).
•
Wall Oven cord kit is Pub # 3-A063
Slide-In cord kit is Pub #3-A073.
Time Settings
•
To access the time settings, press the
SETTINGS pad on the home screen, then
press the appropriate time function pad.
Oven Calibration
Oven calibration offset can be adjusted for the
bake mode only. No other cooking modes are
affected by changing the bake mode temperature.
1. Press the SETTINGS pad.
2. Press the MORE pad until ± TEMP appears in
the display.
3. Press the ± TEMP pad. (Select upper or lower
oven for double oven models.)
4. Press the INCREASE or DECREASE pads to
change the cooking temperature in 1°
increments up to ±35°F.
Note: Oven calibration offset can also be
accessed through the service mode under
OFFSET. (See
)
Service Mode.
Page 11