Advanced Setting - LevelOne WAP-0002 User Manual

Advanced Setting

This page contains configurations for advanced users, which the change will reflect
the wireless performance and operating modes.
AP Mode:
Select one of the AP operating modes for different application of Access Point.
1. AP – The normal Access Point operating mode which forms a wireless ESS
network with its wireless clients.
2. AP Client – Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a
single computer station to join a wireless ESS network through it.
3. Wireless Bridge – A pair of APs operating under Bridge mode to act as the bridge
that connects two Ethernet networks or Ethernet enabled clients together. The
"Remote Bridge MAC" is where you enter the MAC address of the other AP that
you connect to setup the wireless bridge.
4. Multiple Bridge – A group of APs which consists of two or more APs operating
under Multiple Bridge mode, that can connect two or more Ethernet networks or
Ethernet enabled clients together. The way that multiple bridge setup is based on
16