Hardware Installation - Planet ICA-120 User Manual

2.3 Hardware Installation

1. Attach the camera with the included stand
2. Fix camera to desired location with stand
3. Plug an Ethernet cable into the camera
Connect an Ethernet cable to the LAN socket located on the camera's rear and attach it to the
network.
4. Connect the external power supply to camera
Connect the attached power adapter to the DC power jack of the camera. Note: Use the power
adapter, 12VDC, included in the package and connect it to wall outlet for AC power.
Once you have installed the camera well and powered it on, the power LED will turn on. It
means the system is booting up successfully. Furthermore, if you have a proper network
connection, and access to the camera, the LED will flash green under wired mode.
5. Done
8