Rear View - Planet ICA-120 User Manual

2.2.2 Rear View

Audio Output Jack
LAN Socket
External MIC Jack
Audio Output Jack
DC Power Jack
LAN Socket
Factory Default Reset
Power & LAN LED
(green color)
DI/DO Connector
External Microphone
Power & LAN LED
Audio-out Jack allows this device to output audio for two-way
communication or alerting sound.
The input power is 12VDC.
NOTE Only use the power adapter supplied with ICA-120.
Otherwise, the product may be damaged.
The LAN socket is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built
N-Way protocol can detect or negotiate the transmission speed of the
network automatically. Please use Category 5 "straight through" cable
to connect the Network Camera to a 100Mbps Fast Ethernet network
switch or hub.
NOTE In case you need to connect the device to PC or notebook
directly, you should use "cross-over" cable instead.
This button is hidden in the pinhole. Please refer to the Appendix A in
this manual for more information.
This LED is used to indicate whether DC power is on or not. In
addition, this LED will be flashing while network accessing via
Ethernet.
The Camera provides a terminal block with 4 pins of connectors for DI
and DO. Please refer to the Appendix E in this manual for more
information.
The Camera also supports external microphone. User can plug in an
external microphone to pick up voice more.
7
DC Power Jack
Factory
Default
Reset
DI/DO
Connector